운영자 김화중(경북대학교 건축학부 명예교수, 영문 표기 Wha-Jung Kim · WJ Kim)이 국제 학술지와 국내 학회지·학술대회에 발표한 논문 가운데, 공개 학술 데이터베이스(Semantic Scholar·Crossref)에서 확인된 155편을 분야별로 정리했습니다. 공동 연구를 포함하며, 데이터베이스에 없는 논문은 빠져 있을 수 있습니다. 링크는 학술지의 논문 원문(DOI)으로 연결됩니다.
광촉매·환경 정화 재료(25) · 콘크리트 균열 자기수복·미생물(18) · 콘크리트·시멘트 재료(11) · 구조·화재 안전(37) · 계측·센서·진동(20) · 화학·나노 소재(44)
광촉매·환경 정화 재료 25편
햇빛으로 공기·물속 오염물(질소산화물 등)을 분해하는 이산화티타늄(TiO2) 기반 재료, 미생물·제올라이트를 넣은 수질 정화 블록 등 건축재료 적용
- Exploratory machine learning analysis of research trends in photocatalytic cementitious materials. Applied Materials Today, 2026. doi:10.1016/j.apmt.2025.103068
- Influence of synthesis and optimization parameters on NOx degradation performance of TiO2 nanoparticles via sol-gel method. Journal of Physics and Chemistry of Solids, 2026. doi:10.1016/j.jpcs.2025.113005
- Complex Challenges in the Textile Industry and Potential Solutions in Photocatalytic Coating Technology: A Systematic Literature Review. Materials, 2025. doi:10.3390/ma18040810
- Sol-Gel nano TiO2 synthesis using TTIP: Latest trends, a comprehensive review of attribute optimization and various applications. Materials Today, 2025. doi:10.1016/j.mattod.2025.05.009
- A study on the applicability of waste desulfurization agents to the sulfur denitrification process: Demonstration of RO concentrated wastewater from sewage reuse. Journal of The Korean Society of Water and Wastewater, 2024. doi:10.11001/jksww.2024.38.5.283
- Development of TiO2–CaCO3 Based Composites as an Affordable Building Material for the Photocatalytic Abatement of Hazardous NOx from the Environment. Nanomaterials, 2024. doi:10.3390/nano14020136
- Synergistic effect of Li, La co-doping on photocatalytic activity of BaTiO3 ferroelectric material for effective degradation of toxic NOx for environmental remediation. Journal of Environmental Chemical Engineering, 2024. doi:10.1016/j.jece.2024.112801
- Facile and Simple Post Treatment Ball Milling Strategy for the Production of Low-Cost TiO2 Composites with Enhanced Photocatalytic Performance and Applicability to Construction Materials. Materials, 2023. doi:10.3390/ma16144931
- Simultaneous removal process of hydrogen sulfide and siloxanes and field application of iron hydroxide desulfurization agent for green hydrogen production from biogas. Detritus, 2023. doi:10.31025/2611-4135/2023.18276
- Novel visible light active ternary TiO2-ZnO-WO3 composites: Facile preparation strategy and performance evaluation using the response surface design. Journal of Environmental Chemical Engineering, 2022. doi:10.1016/j.jece.2022.108224
- Optimization and modeling of efficient photocatalytic TiO2-ZnO composite preparation parameters by response surface methodology. Journal of Environmental Chemical Engineering, 2021. doi:10.1016/j.jece.2021.106417
- Cost-Effective Production of TiO2 with 90-Fold Enhanced Photocatalytic Activity Via Facile Sequential Calcination and Ball Milling Post-Treatment Strategy. Materials, 2020. doi:10.3390/ma13225072
- Manganese and Graphene Included Titanium Dioxide Composite Nanowires: Fabrication, Characterization and Enhanced Photocatalytic Activities. Nanomaterials, 2020. doi:10.3390/nano10030456
- Recent Progress in the Abatement of Hazardous Pollutants Using Photocatalytic TiO2-Based Building Materials. Nanomaterials, 2020. doi:10.3390/nano10091854
- A Comparative Evaluation of Physicochemical Properties and Photocatalytic Efficiencies of Cerium Oxide and Copper Oxide Nanofluids. Catalysts, 2019. doi:10.3390/catal10010034
- Preparation of Visible Light Photocatalytic Graphene Embedded Rutile Titanium(IV) Oxide Composite Nanowires and Enhanced NOx Removal. Catalysts, 2019. doi:10.3390/catal9020170
- Physical and Electrochemical Properties of Pt-Hollow-Structured TiO2 Prepared at Different pH’s and Its Self-Humidifying Ability in PEMFC. ACS Sustainable Chemistry & Engineering, 2018. doi:10.1021/acssuschemeng.8b04519
- Field Applicability Evaluation of Secondary Dam for Water Purification using Microorganism and Volcanic Pumice. Journal of Korean Society of Water Science and Technology, 2015. doi:10.17640/kswst.2015.23.6.105
- Nanophase Changes in Nickel Doped Titania Composites by Thermal Treatment and Photocatalytic Destruction of NO(x). Journal of Nanoscience and Nanotechnology, 2015. doi:10.1166/jnn.2015.10571
- Site Assessment for the Water Purification Effect of Porous Concrete by using Effective Micro-organisms. 2015. doi:10.11112/jksmi.2015.19.1.109
- Water Purification effect by Zeolite mixed Cement block used with Microorganisms and Photocatalyst. 2015.
- Characterization and Photocatalytic Activity of Heat Treated Zinc Doped Titanium Dioxide. 2013. doi:10.1166/apm.2013.1029
- An Experimental Study on Water-Purification Properties and the Development of Green Building Materials in Moss Bricks Using Effective Micro-Organisms. 2012.
- An Experimental Study on Water-Purification Properties in Cement Bricks Using Effective Micro-Organisms and Zeolite. Journal of the Korea Concrete Institute, 2011. doi:10.4334/jkci.2011.23.3.331
- Synthesis, Characterization, and Application of Zr,S Co-doped TiO2 as Visible-light Active Photocatalyst. Bulletin of The Korean Chemical Society, 2008. doi:10.5012/bkcs.2008.29.6.1217
콘크리트 균열 자기수복·미생물 18편
미생물이 만드는 탄산칼슘으로 콘크리트·모르타르의 균열을 메우고 강도·내구성을 높이는 연구
- An Assessment of Properties on Electrical Chloride Penetration Resistance and Compressive Strength of Micro-organism Mixed Concrete. Journal of the Architectural Institute of Korea Structure & Construction, 2015. doi:10.5659/jaik_sc.2015.31.12.35
- Diversity Assessment of Microorganisms Isolated from Concrete Structures. Journal of the Architectural Institute of Korea Structure & Construction, 2015. doi:10.5659/jaik_sc.2015.31.12.45
- Effect of Microorganism Sporosarcina pasteurii on the Hydration of Cement Paste. Journal of Microbiology and Biotechnology, 2015. doi:10.4014/jmb.1411.11037
- Evaluation of Compressive Strength Characteristic on Micro-organism Mixed Blast Furnace Slag Mortar. Journal of the Architectural Institute of Korea Structure & Construction, 2015. doi:10.5659/jaik_sc.2015.31.2.21
- Effect of Microbially Induced Calcite Precipitation on the Strength of Cemented Sand. 2014. doi:10.1061/9780784413456.006
- Effect of JC-1 microorganism on compressive strength of cement paste. Materials Letters, 2013. doi:10.1016/j.matlet.2013.04.022
- The Effect of Microorganisms on Compressive Strength of Cement Paste. 2013.
- Application of Bacillus subtilis 168 as a multifunctional agent for improvement of the durability of cement mortar. Journal of Microbiology and Biotechnology, 2012. doi:10.4014/jmb.1202.02047
- Application of alkaliphilic biofilm-forming bacteria to improve compressive strength of cement-sand mortar. Journal of Microbiology and Biotechnology, 2012. doi:10.4014/jmb.1110.10009
- Application of antifungal CFB to increase the durability of cement mortar. Journal of Microbiology and Biotechnology, 2012. doi:10.4014/jmb.1112.12027
- Characterization of Mortar Using Calcified Cell-CaCO3 by Microbial Biomineralization. 2011. doi:10.1061/41171(401)276
- Effect of Biomineralization on the Strength of Cemented Sands. Journal of the Korean Geotechnical Society, 2011. doi:10.7843/kgs.2011.27.5.075
- The Effect of Biomineralization on Durablity of Mortar. Proceedings of the 6th International Conference on Computational Stochastic Mechanics(CSM-6), 2011. doi:10.3850/978-981-08-7619-7_p036
- Application of Bacteria Isolated from Dok-do for Improving Compressive Strength and Crack Remediation of Cement-sand Mortar. 2010.
- Calcite-forming bacteria for compressive strength improvement in mortar. Journal of Microbiology and Biotechnology, 2010.
- Development of Self-Repairing Smart Concrete Using Micro-biologically Induced Calcite Precipitation. Journal of The Korea Concrete Institute, 2010. doi:10.4334/jkci.2010.22.4.547
- Use of Bacteria Isolated from Dok-do Island for Improving Compressive Strength in Cement-Sand mortar. 2010.
- A Study on the Development of Self-Healing Smart Concrete Using Microbial Biomineralization. Journal of The Korea Concrete Institute, 2009. doi:10.4334/jkci.2009.21.4.501
콘크리트·시멘트 재료 11편
고유동·경량·발포 콘크리트, 수축, CO2 흡수 모르타르 등 재료 연구
- Amine-Functionalized Carbonate Mortars of CO2 Absorption for Carbon Neutrality and Enhanced Rebar Corrosion Resistance. International Journal of Civil Engineering, 2024. doi:10.1007/s40999-024-01054-0
- Study of CO2 absorption by cement paste containing amine compounds: a comparative study of diethylamine, dimethylamine and isopropylamine. Innovative Infrastructure Solutions, 2024. doi:10.1007/s41062-024-01813-x
- Flow Experiments and Analysis of Highly Flowable Concrete Considering the Effect of Dosages of SP Admixture and W/C Ratios. Journal of the Korea Concrete Institute, 2014. doi:10.4334/jkci.2014.26.6.671
- A Study on the Properties of Foamed Concrete with Plaster Using the Experimental Design. Journal of the Korea institute for structural maintenance and inspection, 2013. doi:10.11112/jksmi.2013.17.6.130
- Viscoplastic Particle Method for Flow Simulation of Highly Flowable Mortar and Concrete. Advanced Science Letters, 2012. doi:10.1166/asl.2012.3970
- Optimized Mixing Design of Lightweight Aerated Concrete by Response Surface Analysis. Journal of the Korea Concrete Institute, 2009. doi:10.4334/jkci.2009.21.6.745
- Model for Flow Analysis of Fresh Concrete Using Particle Method with Visco-Plastic Flow Formulation. Journal of The Korea Concrete Institute, 2008. doi:10.4334/jkci.2008.20.3.317
- J-Integral Evaluation of Concrete Fracture Characteristics. International Journal of Concrete Structures and Materials, 2006. doi:10.4334/ijcsm.2006.18.3e.183
- A Study On the Chemical shrinkage and Autogenous Shrinkage of High strength Concrete. Journal of the Korean Institute of Building Construction, 2004. doi:10.5345/jkic.2004.4.2.081
- Development of self-diagnosis in addition to the ability to repair damaged concrete. SPIE Proceedings, 2004. doi:10.1117/12.539740
- The Fundamental Study on Properties of Concrete Using the Garnet with Industrial Wastes. Journal of The Korea Concrete Institute, 1999.
구조·화재 안전 37편
고온에서의 강재·콘크리트 거동, 철근콘크리트 내화 성능, 콘크리트 충전 강관(CFT)·합성 구조
- Thermo-Elastic Anlysis of Reinforced Concrete Space Frames by Fiber Model. Journal of the Korea Concrete Institute, 2018. doi:10.4334/jkci.2018.30.1.003
- EXPERIMENTAL STUDY OF BEAMS WITH EMBOSSED WEB. 2017. doi:10.14455/isec.res.2017.144
- Experiments on Tensile and Shear Characteristics of Amorphous Micro Steel (AMS) Fibre-Reinforced Cementitious Composites. International Journal of Concrete Structures and Materials, 2017. doi:10.1007/s40069-017-0214-7
- Mechanical Properties and Neutron Shielding Performance of Concrete with Amorphous Boron Steel Fiber. Journal of the Korea Institute of Building Construction, 2017. doi:10.5345/jkibc.2017.17.1.009
- Fire-resistant capacity of RC structures considering time-dependent creep strain at elevated temperature. Magazine of Concrete Research, 2016. doi:10.1680/jmacr.15.00170
- Workability and Mechanical Properties of Hybrid Fiber Reinforced Concrete Using Amorphous Steel Fiber and Polyamide Fiber. 2016. doi:10.14190/jrcr.2016.4.4.470
- Characteristics of Elastic Wave in Fire damaged High Strength Concrete using Impact-echo Method. 2015. doi:10.7731/kifse.2015.29.1.001
- A Literature Review on Compartment Fire Temperatures during Fully Developed Fire. Journal of the Architectural Institute of Korea Structure and Construction, 2014. doi:10.5659/jaik_sc.2014.30.10.21
- Compressive Properties of Ultra High Strength Concrete Exposed to High Temperature. Journal of The Korea Concrete Institute, 2014. doi:10.4334/jkci.2014.26.3.377
- State-of-the-Art Research and Experimental Assessment on Fire-Resistance Properties of High Strength Concrete. Journal of the Korea institute for structural maintenance and inspection, 2014. doi:10.11112/jksmi.2014.18.3.028
- A Numerical Model to Evaluate Fire-Resistant Capacity of the Reinforced Concrete Members. Journal of The Korea Concrete Institute, 2013. doi:10.4334/jkci.2013.25.5.497
- Fires and fire prevention measures in Korea from 1392 to 1910. Fire Safety Journal, 2013. doi:10.1016/j.firesaf.2013.08.013
- Numerical and Experimental Studies of the Analysis of Heat Flow in Building Fires. 2013. doi:10.9798/kosham.2013.13.2.037
- An Experimental Study of Fire Risk Characteristic by Extended Balcony of High-Rise Apartments in Fire. 2012. doi:10.14346/jkosos.2012.27.2.065
- Compressive Properties of Amorphous Metal Fiber Reinforced Concrete Exposed to high Temperature. Journal of the Korea Institute of Building Construction, 2012. doi:10.5345/jkibc.2012.12.2.183
- Behavior of a Long-Term Tensile Force Measurement Device. 2009. doi:10.1061/41031(341)302
- Effect of Stiffener Details on Behavior of CFT Column-to-Beam Connections. International Journal of Steel Structures, 2008.
- Structural damage detection in continuum structures using successive zooming genetic algorithm. Structural Engineering and Mechanics, 2008. doi:10.12989/sem.2008.30.2.135
- Behavior of square hollow steel tubes and steel tubes filled with concrete. Thin-Walled Structures, 2007. doi:10.1016/j.tws.2007.07.009
- Prediction of the Fire Behavior According to the Fire Load in an Underground Life Space. 2007.
- Experimental Studies on Shear Strength of High-Strength Lightweight Concrete Beam using the Industrial by-products. Journal of The Korea Concrete Institute, 2006. doi:10.4334/jkci.2006.18.5.621
- Capacity Evaluation of Composite Beams Composed of End-Reinforced Concrete and Center-Steel. Journal of Korean Society of Steel Construction, 2005.
- A Study on the Forecast of Construction Business Failure according to Financial Ratio. Journal of the Korean Institute of Building Construction, 2004. doi:10.5345/jkic.2004.4.2.137
- Structural Behavior of Beam-Column Joints Consisting of Composite Structures. International Journal of Concrete Structures and Materials, 2002.
- A Study on the properties of flexural behavior according to reinforcing method of Composite Beams of different types of structure. Journal of Korean Society of Steel Construction, 2001.
- EFFECT OF HIGH TEMPERATURE ON THE SLIP LOAD OF HIGH-STRENGTH BOLTED FRICTION JOINTS TREATED WITH ZINC-RICH PAINT. Journal of Structural and Construction Engineering (Transactions of AIJ), 2000. doi:10.3130/aijs.65.199
- The Properties for Structural Behavior of Beam-Column Joint Consisting of Composite Structure. Journal of Korean Society of Steel Construction, 2000.
- A study on the Properties for Structural Behavior of High-Performance Concrete Filled Square Steel Tube Columns -The Behavior Properties by Loading Conditions-. 1998.
- A Study on Development for Joint of Concrete Filled Steel Tube Column and P.C Reinforced Concrete Beam(2) -The Behaviors Properties of Joint with Key Parameter, such as Strength of Concrete, size of Panel Zone and Axial Force ratio-. Journal of Korean Society of Steel Construction, 1997.
- A STUDY ON IN-PLANE ELASTO-PLASTIC CREEP BEHAVIOR OF STEEL BEAM-COLUMNS AT ELEVATED TEMPERATURES. Journal of Structural and Construction Engineering (transactions of Aij), 1989. doi:10.3130/aijsx.395.0_121
- Elasto-plastic Creep Thermal Deformation Behavior Of Multi-story Steel Frames Designed By The Plastic Method. Fire Safety Science, 1989. doi:10.3801/iafss.fss.2-739
- SIMPLE FORMULATION FOR STRESS-STRAIN RELATION OF CONCRETE AT ELEVATED TEMPERATURE. Journal of Structural and Construction Engineering (transactions of Aij), 1988. doi:10.3130/aijsx.384.0_1
- THERMAL ELASTO-PLASTIC-CREEP BUCKLING ANALYSIS OF SINGLE STEEL PLATES LOADED IN EDGE COMPRESSION. Journal of Structural and Construction Engineering (transactions of Aij), 1988. doi:10.3130/aijsx.394.0_141
- CREEP BUCKLING OF STEEL COLUMNS AT HIGH TEMPERATURES : Part II Creep buckling tests and numerical analysis. Journal of Structural and Construction Engineering (Transactions of AIJ), 1986. doi:10.3130/aijsx.361.0_142
- ELASTO-PLASTIC CREEP THERMAL DEFORMATION BEHAVIOR OF PLASTIC DESIGNED STEEL FRAMES. Journal of Structural and Construction Engineering (transactions of Aij), 1986. doi:10.3130/aijsx.368.0_68
- UNIAXIAL STRESS-STRAIN FORMULA OF STRUCTURAL STEEL AT HIGH TEMPERATURE AND ITS APPLICATION TO THERMAL DEFORMATION ANALYSIS OF STEEL FRAMES. Journal of Structural and Construction Engineering (Transactions of AIJ), 1986. doi:10.3130/aijsx.363.0_110
- NONLINEAR ELASTO-PLASTIC CREEP BEHAVIOR OF STRUCTURAL STEEL UNDER CONTINUOUSLY VARYING STRESS AND TEMPERATURE. Journal of Structural and Construction Engineering (Transactions of AIJ), 1985. doi:10.3130/aijsx.353.0_92
계측·센서·진동 20편
압전(PZT)·무선 센서를 이용한 구조물 상태 감시, 응력발광 균열 측정, 진동·풍하중
- Electro-mechanical impedance based monitoring for the setting of cement paste using piezoelectricity sensor. Smart Structures and Systems, 2016. doi:10.12989/sss.2016.17.1.123
- Gust effect factors and natural sway frequencies of trees for wind load estimation. 2016.
- Setting Characteristic Assessment of Cementitious Materials using Piezoelectric Sensor. Journal of the Korean Institute of Building Construction, 2016. doi:10.5345/jkibc.2016.16.5.389
- Investigation of Aggregate Size Effect on Cracking Behavior in Concrete Fracture Test using Mechanoluminescent Paint. 2012. doi:10.14346/jkosos.2012.27.6.093
- Investigation of Setting Process of Cementitious Materials Using Electromechanical Impedance of Embedded Piezoelectric Patch. Journal of the Korean Institute of Building Construction, 2012. doi:10.5345/jkibc.2012.12.6.607
- Measuring high speed crack propagation in concrete fracture test using mechanoluminescent material. Smart Structures and Systems, 2012. doi:10.12989/sss.2012.10.6.547
- Temperature Effect on Damage Monitoring of Steel Girder Connection by Wireless Acceleration-Impedance Sensor Nodes. 2011.
- Estimation of modal loads using structural response. Journal of Sound and Vibration, 2009. doi:10.1016/j.jsv.2009.05.003
- Development of Smart Concrete adopting Light-emitting Diode and the Resistance Property of Electric Fuse. 2008.
- Estimation of Damage Using Accelerometer of 3 Axial in Reinforcement Concrete. 2008.
- Full-scale field evaluation of wireless MEMS monitoring system. SPIE Proceedings, 2008. doi:10.1117/12.776172
- HEALTH MONITORING OF STEEL CRANE GIRDER USING PZT SENSORS. Advanced Nondestructive Evaluation II, 2008. doi:10.1142/9789812790194_0081
- Mitigation of Wind-Induced Vibration with Liquid Column Vibration Absorber. Advances in Science and Technology, 2008. doi:10.4028/www.scientific.net/ast.56.259
- Predicting concrete compression strength using PZT. World Forum on Smart Materials and Smart Structures Technology, 2008. doi:10.1201/9781439828441.ch219
- Predicting of damages in concrete structure using PZT and motor oscillator. World Forum on Smart Materials and Smart Structures Technology, 2008. doi:10.1201/9781439828441.ch135
- System identification of a building structure using wireless MEMS and PZT sensors. Structural Engineering and Mechanics, 2008. doi:10.12989/sem.2008.30.2.191
- Experimental Study on Heat Flow According to the Wind Velocity in an Underground Life Space. 2007.
- Estimation using PZT for Vibration of Plates. 2006.
- Monitoring of smart concrete beams in flexure using polymer-based composite sensors. SPIE Proceedings, 2006. doi:10.1117/12.656951
- Wireless monitoring system using LAN for crane. SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006. doi:10.1117/12.658984
화학·나노 소재 44편
제올라이트·나노 소재·연료전지 촉매 등 공동 연구
- Facile Use of Silver Nanoparticles-Loaded Alumina/Silica in Nanofluid Formulations for Enhanced Catalytic Performance toward 4-Nitrophenol Reduction. International Journal of Environmental Research and Public Health, 2021. doi:10.3390/ijerph18062994
- Polyethylene Glycol Coated Magnetic Nanoparticles: Hybrid Nanofluid Formulation, Properties and Drug Delivery Prospects. Nanomaterials, 2021. doi:10.3390/nano11020440
- Nitrogen-doped carbon black supported Pt–M (M = Pd, Fe, Ni) alloy catalysts for oxygen reduction reaction in proton exchange membrane fuel cell. Materials Today Energy, 2019. doi:10.1016/j.mtener.2019.06.007
- Hydrogen storage properties of various carbon supported NaBH4 prepared via metathesis. International Journal of Hydrogen Energy, 2018. doi:10.1016/j.ijhydene.2018.02.142
- Effect of Boron Doping On Graphene Oxide for Ammonia Adsorption. ChemNanoMat, 2017. doi:10.1002/cnma.201700187
- Membrane electrode assembly fabricated with the combination of Pt/C and hollow shell structured-Pt-SiO2@ZrO2 sphere for self-humidifying proton exchange membrane fuel cell. Journal of Power Sources, 2017. doi:10.1016/j.jpowsour.2017.09.043
- Computational analysis of the zinc utilization in the primary zinc-air batteries. Energy, 2016. doi:10.1016/j.energy.2016.02.084
- Studies on Adsorption and Desorption of Ammonia Using Covalent Organic Framework COF-10. Applied Chemistry for Engineering, 2016. doi:10.14478/ace.2016.1025
- Effect of LiCl content on pore structure of catalyst layer and cell performance in high temperature polymer electrolyte membrane fuel cell. Energy, 2015. doi:10.1016/j.energy.2015.07.037
- Evaluation of hydrogenation properties on MgHx-transition metal fluoride composites by planetary ball milling. Metals and Materials International, 2015. doi:10.1007/s12540-015-5103-5
- Self-humidifying Pt–graphene/SiO2 composite membrane for polymer electrolyte membrane fuel cell. Journal of Membrane Science, 2015. doi:10.1016/j.memsci.2014.10.001
- Computational modeling of proton exchange membrane fuel cells including gas‐crossover behavior. International Journal of Energy Research, 2013. doi:10.1002/er.3055
- Computational analysis of mixed potential effect in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 2012. doi:10.1016/j.ijhydene.2012.01.102
- Optimization of catalyst ink composition for the preparation of a membrane electrode assembly in a proton exchange membrane fuel cell using the decal transfer. International Journal of Hydrogen Energy, 2012. doi:10.1016/j.ijhydene.2012.09.013
- Synthesis of Pt-immobilized on silica and polystyrene-encapsulated silica and their applications as electrocatalysts in the proton exchange membrane fuel cell. Materials Research Bulletin, 2011. doi:10.1016/j.materresbull.2010.10.005
- Synthesis of Pt/PEI–MWCNT composite materials on polyethyleneimine-functionalized MWNTs as supports. Materials Research Bulletin, 2011. doi:10.1016/j.materresbull.2011.08.025
- Tetrahedral atom ordering in a zeolite framework: a key factor affecting its physicochemical properties. Journal of the American Chemical Society, 2011. doi:10.1021/ja202739j
- Hydrothermal synthesis of gallium-substituted titanosilicate, ETGS-10. Journal of Porous Materials, 2010. doi:10.1007/s10934-009-9263-x
- Numerical analysis of catalyst agglomerates and liquid water transport in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 2010. doi:10.1016/j.ijhydene.2010.05.035
- Studies of the factors effecting the preparation of heterogeneous platinum-based catalyst on silica supports. Materials Research Bulletin, 2010. doi:10.1016/j.materresbull.2010.06.042
- Synthesis of Y2O3 nano-powders by precipitation method using various precipitants and preparation of high stability dispersion for backlight unit (BLU). Journal of Industrial and Engineering Chemistry, 2010. doi:10.1016/j.jiec.2010.01.047
- Computational analysis of polarizations in membrane-electrode-assembly for proton exchange membrane fuel cells. Journal of Membrane Science, 2009. doi:10.1016/j.memsci.2009.06.006
- Influencing factors on rapid crystallization of high silica nano-sized zeolite Y without organic template under atmospheric pressure. Journal of Porous Materials, 2009. doi:10.1007/s10934-008-9200-4
- Effects of organo-functionalization and sulfonation of MCM-41on the proton selectivities of MCM-41/Nafion composite membranes for DMFC. Microporous and Mesoporous Materials, 2008. doi:10.1016/j.micromeso.2008.01.009
- Incorporation of heteropoly acid, tungstophosphoric acid within MCM-41 via impregnation and direct synthesis methods for the fabrication of composite membrane of DMFC. Journal of Membrane Science, 2008. doi:10.1016/j.memsci.2008.07.039
- Modeling and simulation of evaporation–pyrolysis processes of a naturally smoldering cylindrical cellulosic materials rod: Effect of smoldering rate on product concentrations. Journal of Industrial and Engineering Chemistry, 2008. doi:10.1016/j.jiec.2007.08.006
- Estimation of Rubber Material Property by Successive Zooming Genetic Algorithm. Journal of Solid Mechanics and Materials Engineering, 2007. doi:10.1299/jmmp.1.815
- Adsorption behaviors of ETS-10 and its variant, ETAS-10 on the removal of heavy metals, Cu2+, Co2+, Mn2+ and Zn2+ from a waste water. Microporous and Mesoporous Materials, 2006. doi:10.1016/j.micromeso.2006.03.050
- Adsorption behaviors of nano-sized ETS-10 and Al-substituted-ETAS-10 in removing heavy metal ions, Pb2+ and Cd2+. Microporous and Mesoporous Materials, 2006. doi:10.1016/j.micromeso.2005.06.043
- Compositional and kinetic studies on the crystallization of zeolite beta using cost-efficient TEABr without seed under static and stirred conditions. Journal of Crystal Growth, 2006. doi:10.1016/j.jcrysgro.2006.09.040
- Effect of solvent and crystal size on the selectivity of ZSM-5/Nafion composite membranes fabricated by solution-casting method. Solid State Ionics, 2006. doi:10.1016/j.ssi.2006.09.014
- Organic-free synthesis of ZSM-5 with narrow crystal size distribution using two-step temperature process. Microporous and Mesoporous Materials, 2006. doi:10.1016/j.micromeso.2006.01.009
- The effects of (Na + K)/Na molar ratio and kinetic studies on the rapid crystallization of a large pored titanium silicate, ETS-10 using cost efficient titanium oxysulfate, TiOSO4 under stirring. Microporous and Mesoporous Materials, 2006. doi:10.1016/j.micromeso.2005.09.014
- Compositional and kinetic study on the rapid crystallization of ZSM-5 in the absence of organic template under stirring. Microporous and Mesoporous Materials, 2004. doi:10.1016/j.micromeso.2004.04.024
- Preparation of Li-stabilized K(＋) -beta-aluminas by Sol-gel Process and Their Characterization Compared with Solid State Reaction. Journal of Industrial and Engineering Chemistry, 2004.
- Alkali effect and kinetic studies on the crystallization of a small pored titanium silicate molecular sieve, ETS-4 using different sources of silica and titanium under stirring. Microporous and Mesoporous Materials, 2003. doi:10.1016/j.micromeso.2003.08.002
- Compositional and kinetic studies on the crystallization of ETS-10 in the presence of various organics. Microporous and Mesoporous Materials, 2002. doi:10.1016/s1387-1811(02)00459-6
- Synthesis of MCM-48 via phase transformation with direct addition of NaF and enhancement of hydrothermal stability by post-treatment in NaF solution. Microporous and Mesoporous Materials, 2001. doi:10.1016/s1387-1811(01)00410-3
- Study on the rapid crystallization of ETS-4 and ETS-10. Microporous and Mesoporous Materials, 2000. doi:10.1016/s1387-1811(00)00275-4
- Synthesis of hydrothermally stable MCM-41 with initial adjustment of pH and direct addition of NaF. Microporous and Mesoporous Materials, 2000. doi:10.1016/s1387-1811(00)00194-3
- Synthesis of ZSM-5 at low temperature and atmospheric pressure in a pilot-scale batch reactor. Microporous and Mesoporous Materials, 1998. doi:10.1016/s1387-1811(98)00225-x
- Porous silica ceramics prepared by sol-gel process-Effect of $H_2O/TEOS$ molar ratio-. Journal of The Korean Ceramic Society, 1997.
- Effect of Gravity on Silicalite Crystallization. 1989. doi:10.1021/bk-1989-0398.ch017
- The effect of elevated gravity on the crystallization of the MFI zeolites, ZSM-5, and silicalite. 1989.
기준일 2026-10-27. 운영자 소개는 소개 페이지에 있습니다.